Audi 80/Avant (B4)

Since 1991-1995 of release

Repair and car operation

Audi 80/Avant
+ The description
- Engines
   Basic elements
   Greasing system
   Ventilation картера
   Visual check of the engine
   Обкатка the new engine
   Engine service life
   Nominal and maximum frequency of rotation
   Restriction of frequency of rotation
   Measurement of pressure of compression
   The list of malfunctions
   Проворачивание the engine
   Hydraulic pushers
   Works on gear belt ГРМ
   The list of malfunctions
   Removal and installation of a head of the block of cylinders
   Removal and engine installation
+ System of release of the fulfilled gases
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and воздухозаборные channels
+ Injection system
+ Coupling
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Antiblocking system of brakes
+ Wheels and tyres
+ Kuzovnaja electrosystem
+ Ignition system
+ Illumination
+ Signalling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ Body elements
+ Search of malfunctions
+ Specifications


Обкатка the new engine

During first thousand kilometres rubbing parts of the engine (pistons and cylinders; bearings of sliding and shaft) should have possibility to be earned extra. It is necessary, that it occurred at low loading and low frequency of rotation. The subsequent capacity of the engine and term of its service depend on it. Therefore:

    Do not squeeze out full "gas"; if at you an automatic transmission, prevent position of full loading and sharp pressing against the stop on an accelerator pedal. The maximum frequency of rotation: 4200 rpm! Squeeze out more than 4200 rpm not earlier, than the engine will reach working temperature; at the cold engine be switched earlier. At passage of the first 1000—1500 km the engine should be dispersed gradually till the maximum speed or as much as possible admissible frequency of rotation (6300 rpm are short-term).

 The help: everything that here has been told about the new engine, it is even more necessary to consider at the engine which is passing обкатку after major repairs which, as it is known, reacts to a wrong manner of driving more sensitively.